WP_Term Object
(
    [term_id] => 34
    [name] => Ansys, Inc.
    [slug] => ansys-inc
    [term_group] => 0
    [term_taxonomy_id] => 34
    [taxonomy] => category
    [description] => 
    [parent] => 157
    [count] => 257
    [filter] => raw
    [cat_ID] => 34
    [category_count] => 257
    [category_description] => 
    [cat_name] => Ansys, Inc.
    [category_nicename] => ansys-inc
    [category_parent] => 157
)
ansys sim world 2024 800X100 reg a (1) 
WP_Term Object
(
    [term_id] => 34
    [name] => Ansys, Inc.
    [slug] => ansys-inc
    [term_group] => 0
    [term_taxonomy_id] => 34
    [taxonomy] => category
    [description] => 
    [parent] => 157
    [count] => 257
    [filter] => raw
    [cat_ID] => 34
    [category_count] => 257
    [category_description] => 
    [cat_name] => Ansys, Inc.
    [category_nicename] => ansys-inc
    [category_parent] => 157
)
Ansys, Inc.
Posted on by Paul McLellan

Totem webinar: Analog/Mixed-Signal Power Noise and Reliability

Totem webinar: Analog/Mixed-Signal Power Noise and Reliability
by Paul McLellan on 07-30-2011 at 5:26 pm
Categories: Ansys, Inc., EDA

The Totem webinar will be at 11am on Tuesday 2nd August. This session will be conducted by Karan Sahni, Senior Applications Engineer at Apache Design Solutions. Karan has been with Apache since 2008, supporting the Redhawk, Totem, Sentinel product lines. He received his MS in Electrical Engineering from the Syracuse University New York.

Totem is a full-chip, layout-based power and noise platform for analog/mixed-signal designs. Totem addresses the challenges associated with global coupling of power/ground noise, substrate noise, and package/PCB capacitive and inductive noise for memory components such as Flash and DRAM, high-speed I/Os such as HDMI and DDR, and analog circuits such as power management ICs. Integrated with existing analog design environments, Totem provides cross-probing of analysis results with industry standard circuit design tools. It also enables designers to create a protected model representing the accurate power profile of their IP for mixed-signal design verification. Totem can be used from early-stage prototyping,to guide the power network and package design, to accurate chip sign-off.

Register for the webinar here.

Share this post via:

Comments

There are no comments yet.

You must register or log in to view/post comments.