Array
(
    [content] => 
    [params] => Array
        (
            [0] => /forum/index.php?threads/xenergic%E2%80%99s-sram-for-next-generation-of-ultra-low-power-products.13389/
        )

    [addOns] => Array
        (
            [DL6/MLTP] => 13
            [Hampel/TimeZoneDebug] => 1000070
            [SV/ChangePostDate] => 2010200
            [SemiWiki/Newsletter] => 1000010
            [SemiWiki/WPMenu] => 1000010
            [SemiWiki/XPressExtend] => 1000010
            [ThemeHouse/XLink] => 1000970
            [ThemeHouse/XPress] => 1010570
            [XF] => 2021370
            [XFI] => 1050270
        )

    [wordpress] => /var/www/html
)

Xenergic’s SRAM For Next Generation Of Ultra-Low Power Products

Daniel Nenni

Admin
Staff member
Xenergic was selected by Bosch Sensortec to provide ultra-low power SRAM for their sensing solutions based on microelectromechanical systems (MEMS). Bosch Sensortec GmbH, a fully owned subsidiary of Robert Bosch GmbH, develops and markets a wide portfolio of microelectromechanical systems (MEMS) sensors and solutions tailored for smartphones, tablets, wearables and hearables, AR/VR devices, drones, robots, smart home and IoT (Internet of Things) applications.

Xenergic’s memory solution will enable Bosch Sensortec to add more features and significantly extend the battery lifetime in their products. Richer set of functionalities such as integrated AI/ML features are demanded in next generation of sensor market. However, power is a limiting factor for realization of these functionalities.

On-chip memories are among the largest blocks in digital integrated circuits. On average, the area share is around 70% and their power share is often more than 50%. This is a major hurdle for implementing richer functionalities and extending the battery lifetime in low-power MEMS and system on chips (SoC).

Xenergic provides ultra-low power SRAM IP with its MemoryTailorTM. The MemoryTailorTM , provides Bosch Sensortec with a unique memory solution, optimized for each circuit’s specific design requirements such as voltage, speed and area constraints.

“Working with Bosch Sensortec and their very skilled team in low power design is a privilege and great experience. Combined, our technologies redefine the power boundaries in sensor design” says Babak Mohammadi, CEO of Xenergic.

Xenergic AB, based in Lund, Sweden, is offering on-chip memory (SRAM) solutions with a revolutionizing low power consumption for digital integrated circuits such as AI/ML applications, MEMS products, image sensors, low power Bluetooth, IoT modems and edge processors. The product portfolio consists of single and dual rail SRAM with single port, two port and dual port configurations. It is currently implemented in most major used process technologies and typically reduces the power consumption of an entire SoC by 70-90%.


Recent Posts
Archives
Categories
Xenergic
Address: Scheelevägen 15, 223 70 Lund, Sweden
E-mail: contact.us@xenergic.com
Tel: +46 76-267 182
 
Back
Top