Introduction
When I designed DRAM chips at Intel I wanted to simulate at the worst case process corners to help make my design as robust as possible in order to improve yields. My manager knew what the worst case corners were based on years of prior experience, so that’s what I used for my circuit simulations.… Read More
Don’t get me wrong, I’m a big fan of AMD, I buy AMD based products whenever possible to prevent an innovation stifling Intel monopoly. Unfortunately Silicon Valley coffee house conversations continue to paint a bleak picture for AMD, even with a recent stock surge on better than expected revenue guidance for the rest of 2011. I’m… Read More
Interesting notes from my most recent Taiwan trip: Taiwan unemployment is at a record low. Scooters once again fill the streets of Hsinchu! TSMC will be passing out record bonuses to a record amount of people. TSMC Fab expansions are ahead of schedule. The new Fab 15 in Taichung went up amazingly fast with equipment moving in later… Read More
GLOBALFOUNDRIES showed off its 28nm design ecosystem at #48DAC last week in San Diego. The company featured a full design ecosystem for its 28nm High-k Metal Gate (HKMG) technology, including silicon-validated flows, process design kits (PDKs), design-for-manufacturing (DFM), and intellectual property (IP) in partnership… Read More
Intro
The 28nm nodes is ready with foundry silicon, IP and EDA tools. Tuesday morning at the DAC breakfast I learned more about the 28nm eco-system.
Notes
Why 32/28nm
–Lower power, high integration requirements, mobile applications
What is Ready?
–IP is qualified (ARM, Memories, Foundation IP, SNPS IP, PDKs)
–… Read More
The GlobalFoundries DRC+ platform is one of the most innovative DFM technologies and was well represented at #48DAC. In case you missed it, here is a reprint of a DRC+ overview from GFI just prior to #48DAC:
DRC (Design Rule Constraints) are the fundamental principles in constraining VLSI (Very Large Scale Integration) circuit… Read More
GLOBALFOUNDRIES will show off its 28nm design ecosystem at #48DAC next week in San Diego. The company will feature a full design ecosystem for its 28nm High-k Metal Gate (HKMG) technology, including silicon-validated flows, process design kits (PDKs), design-for-manufacturing (DFM), and intellectual property (IP) in partnership… Read More
Although there has been always a strong relationship between Kilopass and Chartered Semiconductor, this relationship has been even enhanced after the acquisition of Chartered by GLOBALFOUNDRIES, allowing Kilopass’s customers to integrate NVM IP on advanced technology nodes, down to 40nm or even 28nm in the near future.
Before… Read More
Introduction
IC designs go through a layout process and then a verification of that layout to determine if the layout layer width and spacing rules conform to a set of manufacturing design rules. Adhering to the layout rules will ensure that your chip has acceptable yields.
At the 28nm node a typical DRC (Design Rule Check) deck will… Read More
There have been some significant foundry announcements recently that if collated will give you a glimpse into the future of the semiconductor industry. So let me do that for you here.
First the candid EETimes article about TI dumping Samsung as a foundry:
Taiwan’s UMC will take the ”lead role’’ in making the OMAP 5 device on… Read More
