May 21, 2025
Plano, Texas, USA
Siemens is making its AI-enhanced electronic systems design technology accessible to small and mid-sized businesses (SMB) with the release of PADS Pro Essentials software and Xpedition Standard software.
Built on Siemens’ Xpedition technology, these new offerings combine intuitive user experiences, integrated cloud collaboration and AI-driven automation to empower small teams and independent engineers with the same professional-grade capabilities trusted by the world’s most advanced electronics companies, at a fraction of the cost.
“Today’s launch marks a major milestone in our strategy to democratize access to high-performance PCB design and bring the transformative power of AI to the PCB design workflow,” said AJ Incorvaia, senior vice president, Siemens EDA. “With PADS Pro Essentials and Xpedition Standard, we’re delivering scalable solutions that help smaller teams move faster, work smarter, and design with confidence without sacrificing quality or budget.”
PADS Pro Essentials delivers a streamlined, cloud-connected design environment built on Siemens’ proven Xpedition technology at an entry-level price. Tailored for independent engineers and startups, it includes schematic capture, layout, and a seamless design experience that lowers barriers to professional-grade PCB design tools. The Essentials tier also introduces an integrated, co-branded front-end powered by CELUS, allowing engineers to design using intelligent functional blocks with AI-assisted schematic and BOM generation.
Siemens’ PADS Pro Essentials delivers an accessible streamlined, cloud-connected design environment built on Siemens’ proven Xpedition technology at an entry-level price.
Xpedition Standard is built for growing teams that need a balance of cost-efficiency and advanced capabilities. It adds powerful features like design reuse, variant management, advanced routing automation, native 3D layout and deeper collaboration across mechanical, manufacturing and supply chain stakeholders. Teams can further extend capabilities using token-based options, which provide on-demand access to more advanced capabilities such as fully integrated pre- and post-layout signal integrity analysis powered by Siemens’ Hyperlynx™ software for PCB analysis and rigid-flex design without requiring a full tier upgrade.
Siemens’ Xpedition Standard is built for teams that need a balance of cost-efficiency and advanced capabilities such as design reuse, variant management, advanced routing automation, native 3D layout and deep collaboration.
“We took a close look at Xpedition Standard and were genuinely impressed," said Shrouk El-Attar, founder, Shrouk El-Attar consultancy. "Siemens has clearly reimagined the experience. It's intuitive, modern, and far more connected and integrated than we expected. From day one, it felt like a tool built for the way we actually work. I can get real design work done without fighting the software."
Part of the Siemens Xcelerator portfolio of industry software, both new offerings are part of the Xpedition family and are designed to grow with engineers, from individual users to global enterprises. The unified user experience, design libraries and cloud-based collaboration infrastructure provide a seamless upgrade path as team and project requirements evolve.
To learn more about Siemens’ next-generation PCB design tools for SMBs, PADS Pro Essentials and Xpedition Standard, visit: https://eda.sw.siemens.com/en-US/pcb/xpedition/
Siemens Digital Industries Software helps organizations of all sizes digitally transform using software, hardware and services from the Siemens Xcelerator business platform. Siemens' software and the comprehensive digital twin enable companies to optimize their design, engineering and manufacturing processes to turn today's ideas into the sustainable products of the future. From chips to entire systems, from product to process, across all industries. Siemens Digital Industries Software – Accelerating transformation.
Note: A list of relevant Siemens trademarks can be found here. Other trademarks belong to their respective owners.
Email: press.software.sisw@siemens.com
Link to Press Release
Plano, Texas, USA
Siemens is making its AI-enhanced electronic systems design technology accessible to small and mid-sized businesses (SMB) with the release of PADS Pro Essentials software and Xpedition Standard software.
- New PADS Pro Essentials and Xpedition Standard software bring accessible, collaborative and AI powered, professional-grade PCB design to the SMB market to accelerate design cycles, reduce risk and help engineers and small teams deliver higher-quality products faster
Built on Siemens’ Xpedition technology, these new offerings combine intuitive user experiences, integrated cloud collaboration and AI-driven automation to empower small teams and independent engineers with the same professional-grade capabilities trusted by the world’s most advanced electronics companies, at a fraction of the cost.
“Today’s launch marks a major milestone in our strategy to democratize access to high-performance PCB design and bring the transformative power of AI to the PCB design workflow,” said AJ Incorvaia, senior vice president, Siemens EDA. “With PADS Pro Essentials and Xpedition Standard, we’re delivering scalable solutions that help smaller teams move faster, work smarter, and design with confidence without sacrificing quality or budget.”
PADS Pro Essentials delivers a streamlined, cloud-connected design environment built on Siemens’ proven Xpedition technology at an entry-level price. Tailored for independent engineers and startups, it includes schematic capture, layout, and a seamless design experience that lowers barriers to professional-grade PCB design tools. The Essentials tier also introduces an integrated, co-branded front-end powered by CELUS, allowing engineers to design using intelligent functional blocks with AI-assisted schematic and BOM generation.
Siemens’ PADS Pro Essentials delivers an accessible streamlined, cloud-connected design environment built on Siemens’ proven Xpedition technology at an entry-level price.
Xpedition Standard is built for growing teams that need a balance of cost-efficiency and advanced capabilities. It adds powerful features like design reuse, variant management, advanced routing automation, native 3D layout and deeper collaboration across mechanical, manufacturing and supply chain stakeholders. Teams can further extend capabilities using token-based options, which provide on-demand access to more advanced capabilities such as fully integrated pre- and post-layout signal integrity analysis powered by Siemens’ Hyperlynx™ software for PCB analysis and rigid-flex design without requiring a full tier upgrade.
Siemens’ Xpedition Standard is built for teams that need a balance of cost-efficiency and advanced capabilities such as design reuse, variant management, advanced routing automation, native 3D layout and deep collaboration.
“We took a close look at Xpedition Standard and were genuinely impressed," said Shrouk El-Attar, founder, Shrouk El-Attar consultancy. "Siemens has clearly reimagined the experience. It's intuitive, modern, and far more connected and integrated than we expected. From day one, it felt like a tool built for the way we actually work. I can get real design work done without fighting the software."
Part of the Siemens Xcelerator portfolio of industry software, both new offerings are part of the Xpedition family and are designed to grow with engineers, from individual users to global enterprises. The unified user experience, design libraries and cloud-based collaboration infrastructure provide a seamless upgrade path as team and project requirements evolve.
To learn more about Siemens’ next-generation PCB design tools for SMBs, PADS Pro Essentials and Xpedition Standard, visit: https://eda.sw.siemens.com/en-US/pcb/xpedition/
Siemens Digital Industries Software helps organizations of all sizes digitally transform using software, hardware and services from the Siemens Xcelerator business platform. Siemens' software and the comprehensive digital twin enable companies to optimize their design, engineering and manufacturing processes to turn today's ideas into the sustainable products of the future. From chips to entire systems, from product to process, across all industries. Siemens Digital Industries Software – Accelerating transformation.
Note: A list of relevant Siemens trademarks can be found here. Other trademarks belong to their respective owners.
Contacts for Press
Siemens Digital Industries Software PR TeamEmail: press.software.sisw@siemens.com
Link to Press Release