SANTA ROSA, Calif., May 26, 2026
What: At the 2026 IEEE MTT-S International Microwave Symposium (IMS), Keysight Technologies will showcase solutions that help engineers accelerate spectrum utilization by solving complex RF design, emulation, and validation challenges. Demonstrations will highlight how engineers can move faster from concept to deployment while reducing risk across next-generation wireless, aerospace and defense, satellite, quantum computing, and 6G applications.
When: June 7 – 12, 2026
Where: Keysight Booth #19035, Thomas M. Menino Convention & Exhibition Center, Boston, Mass.
Media: Contact Andrea Mueller to schedule media briefings and solution demonstrations.
At booth #19035, Keysight will feature three interactive solution zones:
Simulate Cutting-Edge RF Designs
Design faster, explore more, and optimize RF systems earlier in the workflow.
Featured demonstrations include:
Create realistic RF environments to uncover issues before deployment.
Featured demonstrations include:
Verify performance with confidence across increasingly complex RF architectures.
Featured demonstrations include:
Introducing the New XA5 and XA6 Signal Analyzers
Wednesday, June 10 | 4:00 p.m. at booth #19035
Join Keysight for a special introduction to the Next-Generation X-Series Signal Analyzers XA5 SA6210A and XA6 SA6320A, designed to help engineers address increasingly complex spectrum and wideband signal analysis challenges. The event will include brief remarks from Jun Chie, Vice President of Core Product Management, live technology demonstrations, and networking opportunities with Keysight experts.
Featured Talks with Keysight Experts
Technical Presentations:
Calibration and Measurement Methods for Phased Array Beamforming Antennas
Joel Dunsmore, Keysight Fellow, and Mike Ballou, Director of Antenna Test
June 7 | 8 a.m. – 5:20 p.m.
Room #152
Practical Considerations for Applying AI to RF and Microwave EDA Workflows
Matthew Ozalas, Application Development Engineer & Scientist, Design Engineering Software|
June 7 | 8 a.m. – 5:20 p.m.
Room #153 AB
Over-the-Air Measurement of Distortion Error-Vector-Magnitude in a Reverberation Chamber
Thaimi Niubo Aleman, Research Engineer, and Jan Verspecht, Keysight R&D Fellow
June 10 | 8:20 a.m. – 8:40 a.m.
Room #254B
Bootcamp:
Phased Array Bootcamp
Murthy Upmaka, Solutions Engineering Fellow, and Ian Rippkie, Director Software Solutions Engineering
June 8 | 8:00 a.m. – 11:50 a.m.
Room #206
Panel discussion:
How will the quantum computing explosion drive new growth in the RF electronics supply chain, and RF engineering careers?
Eric Holland, General Manager, Quantum Technologies
June 10 | 12 p.m. – 1:30 p.m.
Room #156C
Will ML/AI really change our approach to device modelling and circuit design?
Alexander Petr, Senior Director
June 11 | 12 p.m. – 1:30 p.m.
Room #157
For additional information, visit Keysight at IMS 2026
About Keysight Technologies
At Keysight (NYSE: KEYS), we inspire and empower innovators to bring world-changing technologies to life. As an S&P 500 company, we're delivering market-leading design, emulation, and test solutions to help engineers develop and deploy faster, with less risk, throughout the entire product lifecycle. We're a global innovation partner enabling customers in communications, industrial automation, aerospace and defense, automotive, semiconductor, and general electronics markets to accelerate innovation to connect and secure the world. Learn more at Keysight Newsroom and www.keysight.com.
andrea.mueller@keysight.com
Jenny Gallacher, Europe
jenny.gallacher@keysight.com
Fusako Dohi, Asia
fusako_dohi@keysight.com
Link to Press Release
What: At the 2026 IEEE MTT-S International Microwave Symposium (IMS), Keysight Technologies will showcase solutions that help engineers accelerate spectrum utilization by solving complex RF design, emulation, and validation challenges. Demonstrations will highlight how engineers can move faster from concept to deployment while reducing risk across next-generation wireless, aerospace and defense, satellite, quantum computing, and 6G applications.
When: June 7 – 12, 2026
Where: Keysight Booth #19035, Thomas M. Menino Convention & Exhibition Center, Boston, Mass.
Media: Contact Andrea Mueller to schedule media briefings and solution demonstrations.
At booth #19035, Keysight will feature three interactive solution zones:
Simulate Cutting-Edge RF Designs
Design faster, explore more, and optimize RF systems earlier in the workflow.
Featured demonstrations include:
- - Transform RF Designs with AI – Demonstrates how AI-driven workflows automate RF design tasks, accelerate optimization, and improve design reuse across complex RF systems.
- - Accelerate Quantum Design – Showcases unified quantum circuit, EM, and system simulations that streamlines superconducting qubit development and reduces costly test iterations.
Create realistic RF environments to uncover issues before deployment.
Featured demonstrations include:
- - Turn Signal Complexity into Clarity – Demonstrates how advanced signal analysis accelerates spurious searches, spectral analysis, and MIMO evaluation in congested RF environments.
- - Master High-Performance Signal Analysis – Showcases how wideband signal analysis enables high-speed validation of emerging V-band, satellite, and 6G waveforms.
- - Unlock Sub THz Device Characterization up to 250 GHz – Demonstrates sub THz (250 GHz) four port differential measurements for precise AI hardware characterization in a single sweep.
Verify performance with confidence across increasingly complex RF architectures.
Featured demonstrations include:
- - Generate High-Fidelity Signal Generation – Demonstrates ultra-low phase noise and fast-switching signal generation for advanced 5G, 6G, NTN, and radar applications.
- - Push PNT Systems to Their Limits – Features realistic PNT emulation that validates GNSS and complementary PNT systems under complex real-world conditions.
Introducing the New XA5 and XA6 Signal Analyzers
Wednesday, June 10 | 4:00 p.m. at booth #19035
Join Keysight for a special introduction to the Next-Generation X-Series Signal Analyzers XA5 SA6210A and XA6 SA6320A, designed to help engineers address increasingly complex spectrum and wideband signal analysis challenges. The event will include brief remarks from Jun Chie, Vice President of Core Product Management, live technology demonstrations, and networking opportunities with Keysight experts.
Featured Talks with Keysight Experts
Technical Presentations:
Calibration and Measurement Methods for Phased Array Beamforming Antennas
Joel Dunsmore, Keysight Fellow, and Mike Ballou, Director of Antenna Test
June 7 | 8 a.m. – 5:20 p.m.
Room #152
Practical Considerations for Applying AI to RF and Microwave EDA Workflows
Matthew Ozalas, Application Development Engineer & Scientist, Design Engineering Software|
June 7 | 8 a.m. – 5:20 p.m.
Room #153 AB
Over-the-Air Measurement of Distortion Error-Vector-Magnitude in a Reverberation Chamber
Thaimi Niubo Aleman, Research Engineer, and Jan Verspecht, Keysight R&D Fellow
June 10 | 8:20 a.m. – 8:40 a.m.
Room #254B
Bootcamp:
Phased Array Bootcamp
Murthy Upmaka, Solutions Engineering Fellow, and Ian Rippkie, Director Software Solutions Engineering
June 8 | 8:00 a.m. – 11:50 a.m.
Room #206
Panel discussion:
How will the quantum computing explosion drive new growth in the RF electronics supply chain, and RF engineering careers?
Eric Holland, General Manager, Quantum Technologies
June 10 | 12 p.m. – 1:30 p.m.
Room #156C
Will ML/AI really change our approach to device modelling and circuit design?
Alexander Petr, Senior Director
June 11 | 12 p.m. – 1:30 p.m.
Room #157
For additional information, visit Keysight at IMS 2026
About Keysight Technologies
At Keysight (NYSE: KEYS), we inspire and empower innovators to bring world-changing technologies to life. As an S&P 500 company, we're delivering market-leading design, emulation, and test solutions to help engineers develop and deploy faster, with less risk, throughout the entire product lifecycle. We're a global innovation partner enabling customers in communications, industrial automation, aerospace and defense, automotive, semiconductor, and general electronics markets to accelerate innovation to connect and secure the world. Learn more at Keysight Newsroom and www.keysight.com.
Contacts
Andrea Mueller, Americasandrea.mueller@keysight.com
Jenny Gallacher, Europe
jenny.gallacher@keysight.com
Fusako Dohi, Asia
fusako_dohi@keysight.com
Link to Press Release