Semiwiki on LinkedIn Semiwiki on Facebook Semiwiki on Twitter Register / Log in 
Array
(
    [content] => 
    [params] => Array
        (
            [0] => /forum/threads/error-regarding-of-v-l-e-h-loops-in-spice-file.7541/
        )

    [addOns] => Array
        (
            [DL6/MLTP] => 13
            [Hampel/TimeZoneDebug] => 1000070
            [SV/ChangePostDate] => 2010200
            [SemiWiki/Newsletter] => 1000010
            [SemiWiki/WPMenu] => 1000010
            [SemiWiki/XPressExtend] => 1000010
            [ThemeHouse/XLink] => 1000970
            [ThemeHouse/XPress] => 1010570
            [XF] => 2021770
            [XFI] => 1050270
        )

    [wordpress] => /var/www/html
)

Error regarding of V-L-E-H loops in spice file

G

gunjanpatel313

New member
Hello all,

I phase the following error during I simulate the spice files in synospys VCS-AMS tool.

Error: Voltage/Inductor/E-element/H-element loop occurs

so, How to solve this type error?

Here I attach a error message,log file snapshot and two spice file in Zip folder.
 
According to UCI info about HSPICE:

Q: Why do I get the error "<kbd class="courier"> inductor/voltage source loop</kbd> "?
A: This is normally caused by:
1. A voltage source with the inductor connected to the same point.
2. A voltage source with an inductor connected directly across its nodes.
3. Two or more inductors connected in a loop with nothing to limit the current.
The best way to solve this type of error is to connect a small series resistance (1 nano ohm or smaller usually works).​
Solution: 464
 
Last edited:
You must log in or register to reply here.
Back
Top