Array
(
    [content] => 
    [params] => Array
        (
            [0] => /forum/index.php?threads/trieye-shortens-time-to-market-for-next-generation-cmos-based-swir-image-sensors-with-the-cadence-spectre-x-simulator.13145/
        )

    [addOns] => Array
        (
            [DL6/MLTP] => 13
            [Hampel/TimeZoneDebug] => 1000070
            [SV/ChangePostDate] => 2010200
            [SemiWiki/Newsletter] => 1000010
            [SemiWiki/WPMenu] => 1000010
            [SemiWiki/XPressExtend] => 1000010
            [ThemeHouse/XLink] => 1000970
            [ThemeHouse/XPress] => 1010570
            [XF] => 2021370
            [XFI] => 1050270
        )

    [wordpress] => /var/www/html
)

TriEye Shortens Time to Market for Next-Generation CMOS-Based SWIR Image Sensors with the Cadence Spectre X Simulator

Daniel Nenni

Admin
Staff member
Spectre X Simulator provided 2X performance gain to meet ISO requirements for critical automotive applications
October 12, 2020 10:45 AM Eastern Daylight Time

SAN JOSE, Calif.--(BUSINESS WIRE)--Cadence Design Systems, Inc. (Nasdaq: CDNS) today announced that TriEye used the Cadence® Spectre® X Simulator to accelerate the design of a next-generation CMOS-based Short-Wave Infrared (SWIR) image sensor by several months. Using the Spectre X Simulator, TriEye observed at least a 2X performance gain over previous simulators while achieving the required accuracy to meet ISO requirements for critical automotive applications.
TriEye is a fabless semiconductor company with the world's first CMOS-based SWIR sensing solution. TriEye’s challenge was to put together accurate simulations of arrays that contain over a million transistors. This level of accuracy requires a SPICE-based simulator, but most SPICE simulators have limited performance and capacity to tackle the complexity of these designs. Using the Spectre X Simulator, TriEye was able to significantly speed up their design cycle.

TriEye also leveraged the Cadence Virtuoso® ADE Assembler and Virtuoso ADE Verifier to easily set up hundreds of tests under various power, voltage and temperature (PVT) conditions and run exhaustive verification plans. The combination of simulation performance, easy analysis of pass/fail data and detailed specification tracking reduced their overall time to market by weeks.

“Our state-of-the-art CMOS-based SWIR image sensors require accurate verification down to the smallest level of detail while still adhering to a very demanding timeline,” said Omer Kapach, VP R&D and Co-Founder of TriEye. “The Spectre X Simulator’s capacity and performance improvements let us simulate our sensors accurately with a 2X speed improvement. When used in combination with the Virtuoso ADE Assembler, we were able to optimize our design quickly and efficiently and provide accurate modeling for post-silicon activities.”

The massively parallel Spectre X Simulator maintains the golden accuracy customers have come to expect from over 25 years of Spectre industry leadership in analog, mixed-signal and RF applications. The simulator supports the Cadence Intelligent System Design™ strategy, enabling design excellence. For more information on the Spectre X Simulator, please visit www.cadence.com/go/SpectreXSim.

About Cadence
Cadence is a pivotal leader in electronic design, building upon more than 30 years of computational software expertise. The company applies its underlying Intelligent System Design strategy to deliver software, hardware and IP that turn design concepts into reality. Cadence customers are the world’s most innovative companies, delivering extraordinary electronic products from chips to boards to systems for the most dynamic market applications including consumer, hyperscale computing, 5G communications, automotive, aerospace, industrial and healthcare. For six years in a row, Fortune magazine has named Cadence one of the 100 Best Companies to Work For. Learn more at cadence.com.

© 2020 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo and the other Cadence marks found at www.cadence.com/go/trademarks are trademarks or registered trademarks of Cadence Design Systems, Inc. All other trademarks are the property of their respective owners.

Contacts
For more information, please contact:
Cadence Newsroom
408-944-7039
newsroom@cadence.com
 
Back
Top